write any four factors that may hamper the unity in diversity feature of Nepal and the Nepalese .
Answers
Answer:
Explanation:
different religions
people of different languages
different clothing patterns
different eating habits
Related Questions
Raquel is setting her career goals. Because she hasn’t decided on a specific industry to focus on yet, she’s creating multiple career plans. What is MOST likely to help her if she plans to work in a mid-level career?
A.
activities that will improve her management skills
B.
an education that will give her an advanced degree
C.
getting her first-aid training and certification
D.
learning how to write and “debug” computer code
Answers
Hello please help the Slice are in order
Slide 2: Think about when I squirted water out of the syringe and how the change in area affected the speed of the water.
● When you fill up a bottle at the sink, what happens to the speed of the water rising as the water approaches the narrow neck? __________________
● If the wind has to suddenly go through a small area, the wind’s speed _________________
Slide 3:
● Remind me, objects move from areas of __________ pressure to areas of _____________ pressure.
● If I blow directly onto something, it moves farther away because my wind is _____________________.
● If I blow along the surface of an object, which way does the object move? _______________________
● Moving fluids create a stream of _________________ pressure. The faster the fluids flow, the ________________ the pressure becomes.
Slide 4: This is called the Bernoulli Principle.
● In the box to the right, draw a picture of a single raindrop.
Slide 5:
● Wings are ------- on the top and ----------- on the bottom.
● The __________ of the wing is a longer distance than the ________________.
● It takes the air the same amount of time to get around the wing whether it goes over or under it. Therefore, air going _____________ the wing is moving faster than air going ____________ the wing.
● The ________________ an airplane is moving, the more force there is pulling the wings up.
Answers
Sure, I'd be happy to help! Here are the answers to the questions on each slide:
Slide 2:
As the water approaches the narrow neck of a bottle, the speed of the water rising decreases.
If the wind has to suddenly go through a small area, the wind’s speed increases.
Slide 3:
Objects move from areas of high pressure to areas of low pressure.
If you blow directly onto something, it moves farther away because your wind is high-pressure.
If you blow along the surface of an object, the object moves in the same direction as the wind.
Moving fluids create a stream of low pressure.
The faster the fluids flow, the lower the pressure becomes.
Slide 4:
Please draw a raindrop in the box provided.
Slide 5:
Wings are curved on the top and flat on the bottom.
The distance the air has to travel over the top of the wing is a longer distance than the distance it has to travel underneath the wing.
It takes the air the same amount of time to get around the wing whether it goes over or under it.
Therefore, air going over the wing is moving faster than air going under the wing.
The faster an airplane is moving, the more force there is pulling the wings up.
For similar questions on slide
https://brainly.com/question/30269198
#SPJ11
NO LINKS OR BE REPORTED. Please help me I can't figure this out.
Answers
Answer: 11.25
Explanation:
Who is authorized to perform an Annual Inspection?
Answers
Answer:
The holder of an IA
Explanation:
The Engineering Design Process is used to:
Answers
Answer:
to find a solution to a problem.
Explanation:
The engineering design process, by definition, is a series of steps that engineers use to find a solution to a problem. These steps include: defining the problem, brainstorming solutions, designing and building a prototype of the solution, testing the solution, and improving it.
which of these is not a safe skill to employ in presence of road workers
Answers
In the presence of road workers the deadliest work is to flattening the hot black liquid
If 360 Joules of work is needed to move a crate a distance of 4 meters, how much force was applied of the crate?
Answers
As you increase the amount of pulleys in a pulley system, the mechanical
advantage increases making the applied work
harder
easier
stay the same
harder, then easier
Answers
Answer:
The correct option is;
Easier
Explanation:
The force required to lift a given load reduces when the number of pulleys in a pulley system is increased because the number of ropes sharing the applies pulling force is increased, however, the distance by which the rope is to be pulled is doubled when the required force to lift a given load is half the weight of the load.
an engineering team has a goal of installing new, more efficient solar panels on the international space station . which equation best describes a cost-benefit analysis the team might perform
Answers
In a cost-benefit analysis, the engineering team aims to evaluate the feasibility and value of installing new, more efficient solar panels on the International Space Station (ISS). They can use the following equation:
Net Benefit = Total Benefits - Total Costs
Identify the Total Benefits: The engineering team assesses the advantages and positive outcomes associated with the new solar panels. These benefits could include increased energy generation, reduced reliance on other power sources, and potential cost savings.Quantify the Total Costs: The team determines the expenses involved in installing the new solar panels, such as research and development costs, manufacturing, transportation, installation, and ongoing maintenance expenses. They also consider any potential risks or drawbacks associated with the project.Calculate Net Benefit: Subtract the Total Costs from the Total Benefits to obtain the Net Benefit. A positive net benefit indicates that the benefits outweigh the costs, suggesting the project is economically viable. Conversely, a negative net benefit may indicate that the costs outweigh the potential benefits, requiring further evaluation or adjustments to the project.By using this cost-benefit analysis equation, the engineering team can make an informed decision about the installation of new, more efficient solar panels on the ISS.
For more such question on cost-benefit analysis
https://brainly.com/question/199821
#SPJ8
DRIVERS ED.. Put these steps in order!! PLEASE
Put these steps for executing a turn in the correct order:
Reduce speed and search the intersection
When safe, look into the turn and accelerate
Position the vehicle in the lane to prepare for the turn.
Signal
Enter nearest lane traveling in the correct position
Move to the correct lane to prepare for the turn.
Answers
The correct sequence of steps to execute a turn are:Reduce speed and search the intersection.
SignalPosition the vehicle in the lane to prepare for the turn.Move to the correct lane to prepare for the turn.Enter nearest lane traveling in the correct position.When safe, look into the turn and accelerate. Here is a more detailed explanation of each step:
1. Reduce speed and search the intersection: The first step is to reduce your speed to an appropriate level and search the intersection for any traffic lights, stop signs, or pedestrians.
2. Signal: Signal to inform other drivers of your intention to turn.3. Position the vehicle in the lane to prepare for the turn: Position your vehicle in the lane that you need to be in to make the turn.
4. Move to the correct lane to prepare for the turn: If you need to change lanes to make the turn, move to the correct lane in a safe and timely manner.5. Enter nearest lane traveling in the correct position: Enter the nearest lane that will take you in the direction you need to go and maintain your position in the lane.
6. When safe, look into the turn and accelerate: Once you are in the turn, look into the turn to see where you are going and accelerate as necessary to maintain a safe speed.
For more such questions speed,Click on
https://brainly.com/question/21729272
#SPJ8
Which symbol in the figure is used to represent a thermostat contact for a heating system
Answers
Answer:
:)
Explanation:
its picture a
Which set of conditions will result in the highest rate of evaporation?
Answers
the 6 penalties for driving under influence
Answers
1. During a pandemic or other disease outbreak, what are some things employers and employees can do in the
construction Industry?
A) O Modify work schedules to stagger work times and reduce the number of workers in an area at a time
B) O Limit tool sharing
C) O Be prepared for temperature checks when arriving for a work shift
D) O All of the above
Next Page >>
Answers
Answer:
D
Explanation:
I'm not sure but they all make sense, I dont really know the context though.
 A game consists of a 3-card hand. What are the chances of have a pair (same face-value) in a hand, given the first two cards are not a pair?
Answers
Answer:13
Explanation:
The probability of getting a pair (but NOT three of a kind) in three-card poker would be 3744/22100 = .1694+.
Obviously any of the three cards NOT in the pair is equally likely to have been dealt to you last. So in the 1/3 of cases where the non-paired card was dealt last, then your criteria were met: first you got a pair, then you got something outside the pair. 1/3 of the above value is 1248/22100 = 0.05647+.
How did I get the 3744/22100 figure?
13 (number of ranks the pair could be in) TIMES 6 (number of ways to have two of the four cards within the paired rank) TIMES 48 (number of ways to have one of the other cards outside the pair) DIVIDED BY 22100 (which is 52 choose 3, the number of unique three card poker hands.)
An electric vehicle must be______ to gain energy
A) hooked up to another EV
B) Fueled with gasoline
C) Plugged into a wait outlet or charging equipment
D) Solar charged
Answers
Answer:
C
Explanation:
Answer:
C
Explanation:
Because for a vehicle to gain energy and move to one place to another it needs gasoline (petrol)
What is the correct order for the first three steps of the engineering design process?
Answers
Answer:
1 - Define the problem
2. Do background Research
3 - Specify the requirements needed to fix/solve/complete the task at hand
Hope this helps!
Explanation:
1. The problem must be know before anything can be done
2. Do background Research to find if this issue has been solved or what can be done to solve it
3 - Find the requirements needed to fix the issue (ex. Size of replacement part)
The three main step of the engineering design process includes define the problem, develop ideas and optimize the design solution.
An engineering design process refers to series of steps that engineers usually follow to find a solution to a problem.
The main purpose of engineering design process is to apply uniform scientific knowledge to the solution of technical problems.
The three main step of the engineering design process includes:
define the problemdevelop ideasoptimize the design solution.Read more about engineering design process
brainly.com/question/411733
How exactly do you do the rabbit in the hole loop on your shoe.
I have been alive for 13 years and still do not know.
I'm serious.
help.
Answers
Step 1- put shoe on
Step 2- grab the laces and cross them
Step 3- once you crossed them pick them back up and put one underneath one.
Step 4- tighten it then make two bunnies
Step 5- put on bunny over the other then loop it around
Step 6 pull the loops and bam you now know how to tie your shoes
purpose of all components in a water level sensor
Answers
Answer:
A combination of high and low sensors are used to tell the control panel when water levels are too high or too low. The control panel will then automatically turn the pump on or off depending on the corrective action needed.
Explanation:
purpose of all components in a water level sensor
Which of the following statements are true of computer hardware engineers?
Answers
Answer:
you never mentioned the options
Perchuty (P. z fan ce the Treffe resistivalyThe law of resistivity.
Answers
We can see here that the law of resistivity, also known as Ohm's law, states that the electrical resistance of a conductor is directly proportional to its resistivity and length, and inversely proportional to its cross-sectional area.
How is law of resistivity represented?The Law of resistivity can be mathematically represented as:
R = ρ × (L / A)
Where:
R is the electrical resistance of the conductor,
ρ (rho) is the resistivity of the material,
L is the length of the conductor, and
A is the cross-sectional area of the conductor.
The resistivity (ρ) is a characteristic property of a material that quantifies its ability to resist the flow of electric current. It depends on the nature of the material, its temperature, and sometimes its purity. Resistivity is measured in ohm-meters (Ω·m).
Learn more about resistivity on https://brainly.com/question/30611906
#SPJ1
Which of the following describes one of the functions of a workflow?
Responses
to develop criteria for the conditions of satisfaction
to develop criteria for the conditions of satisfaction
to review details about the conditions of satisfaction
to review details about the conditions of satisfaction
to identify users’ e-mails and phone numbers
to identify users’ e-mails and phone numbers
to coordinate the transfer of information
to coordinate the transfer of information
Answers
The one of the functions of a work flow to coordinate the transfer of information. Thus, option D is correct.
A workflow refers to a series of tasks or steps that need to be completed in a specific order to achieve a particular goal or outcome. One of the functions of a workflow is to coordinate the transfer of information. This involves ensuring that the relevant information is passed from one step or participant to another in an organized and efficient manner.
Coordinating the transfer of information helps to maintain the flow of work, prevents bottlenecks, and ensures that everyone involved has access to the necessary information to complete their tasks effectively.
Learn more about workflow on:
https://brainly.com/question/31601855
#SPJ1
Can somebody help me
Answers
Engineer recognize the danger of not wearing the seat belt and decided to put pressure on the government to enact laws mandating their use is explaining how the government regulations guided the development of the seat belt technology. Hence, option D is correct.
What is seat belt technology?Active seatbelt systems have a motor that, in dangerous situations, pulls the seat belt webbing out of the way before a collision occurs. Data from active safety systems, such as the Electronic Stability Control or Brake Assist systems, can be used to activate an active seat belt.
A seatbelt is made up of a retractor and a belt made of flexible webbing. The retractor is composed of a spool around which the belt winds and a spring attached to the spool to maintain the webbing taut. It is often housed in a plastic box over the passenger's outer shoulder.
Lap belts, sash belts, automated seat belts, three-point belts, belt-in-seat (BIS), five-point harnesses, and six-point harnesses are a few of the most popular styles of seat belts.
Thus, option D is correct.
For more information seat belt technology, about click here:
https://brainly.com/question/19522837
#SPJ2
Which tool is used to measure movement
Dial indicator
Feeler gauge
Inside micrometer
Outside micrometer
Answers
Answer:
Inside micrometer
Explanation:
what you guys like the best
Answers
Answer:
I Don't Know
Explanation:
How do you earn Brainliest?
Answers
What is the BEST definition of engineering?
the observation of the natural world to develop theories
to make predictions about what will happen in certain circumstances
to create a base of knowledge about the world we live in
to apply scientific knowledge to solve real-world problems
Answers
Answer:
D. to apply scientific knowledge to solve real-world problems
Explanation:
Engineering involves with Science, Technology. It makes things useful to people.
I hope it helps! Have a great day!
pan~
Can someone help here’s a picture
Answers
Answer:
6--b
7--a
8--c
9--f
10--d
Explanation:
6. Miter saw/circular blade with perimeter teeth (b.wood/metal sheet)
7. Miter saw/circular blade with 60+ teeth. (a.ceramic tile)
8. Circular saw/circular blade with abrasive. (c. fine cuts on expensive molding)
9. Reciprocating saw/straight blade, bimetal. (f. solid metal)
10. Circular saw/circular blade with grinding edge, dry. (d. demolition having old nails)
About circular sawA circular saw is a type of cutting tool in the form of a chainsaw with a round and serrated saw blade. With this type of saw, cutting wood becomes easier. Not only that, Circular Saw is also often chosen because of the practicality of its use. In addition, this circular saw is also very practical to remove. So if the saw blade is dull, then you can easily remove it to be sharpened again, or replaced with a new one.
Learn more about circular saw at
https://brainly.com/question/17157503
#SPJ1
Help!!! Its about Engineering!!! Will give brainliest!!!
Taking things apart is a valuable way to learn how something works. Biological dissection has been used to learn about the human body, while mechanical dissection has been used to learn about engineered systems. Think of or research a specific example of how dissection has been used in both medicine and engineering to advance learning and understanding.
Answers
What is an automotive system in relation to a vehicle’s structure and operation?
Answers
Automotive System. A group of related parts that perform a specific function. Body and Chassis System. Body, frame, suspension, steering, braking which support, stop and enclose the parts of the car.
Answer:
Automotive System. A group of related parts that perform a specific function. Body and Chassis System. Body, frame, suspension, steering, and braking support, stop and enclose the car parts.